Shenzhen Eton Automation Equipment Co., Ltd.
Shenzhen Eton Automation Equipment Co., Ltd. Innovation Technology,Service Foremost,Keep Improving
Add to Cart
Smt Pcb Stencil Printer Fully Automatic Solder Paste Printer For Electronics Circuit Board Printing
ET-F1500 automatic stencil printer
Automatic solder paste printing machine
Most electronic product manufacturers in the market use fully automatic solder paste printers to produce SMT products. The automatic solder paste printing machine prints the solder paste onto the pads of the components on the bottom plate. However, the surface mount components are increasingly finer and finer, so the design of the circuit board is correspondingly fine and small. Therefore, the solder paste must also be printed. Greatly improve its accuracy and performance.
PCB placement is accomplished using a conveyor belt carried by the edge. Process parameters such as blade speed, blade pressure, print length, and non-contact spacing are programmable. The positioning of the PCB is to use the positioning hole or the edge of the board. Some devices can even use the vision system to adjust the PCB and the steel plate in parallel. When using this type of vision system, the error caused by the edge positioning can be avoided and the positioning can be made. It becomes easy, and manual positioning confirmation is replaced by the visual system. The newer solder paste printers are equipped with a video lens that can be used to monitor the printing situation at any time.
ET-F1500 is the automatic stencil printer
ET-F1500 suitable for automatic smt production line, can improve the effectiveness
ET-F1500 demension parameter
| Model | ET-F1500 | |
| Screen Frames | Min Size | 1100X300mm |
| Max Size | 1800X750mm | |
| Thickness | 25~40mm | |
| PCB Min Size | 80X50mm | |
| PCB Max Size | 1500X350mm | |
| PCB Thickness | 0.4~6mm | |
| PCB Warpage | ＜1% | |
| Transport Height | 900±40mm | |
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | |
| Transport Speed | Max 1500mm/S Programmable | |
ET-F1500 Control system parameter
| Board Location | Support System | Magnetic Pin/Up-down table adjusted/supportblock by hand |
| Clamping System | side clamping,vacuum nozzle | |
| Squeegee Speed | 6~200mm/sec | |
| Squeegee Pressure | 0~15Kg | |
| Squeegee Angle | 60°/55°/45° | |
| Squeegee Type | Stainless steel(Standard), plastic | |
| Stencil Separation Speed | 0.1~20mm/sec Programmable | |
| Cleaning System | Dry,Wet,Vacuum (Programmable) | |
| Table Adjustment ranges | X:±10mm;Y:±10mm;θ:±2° | |
| Repeat Position Accuracy | ±0.015mm | |
| Printing Accuracy | ±0.03mm | |
| Cycle Time | <12s (Exclude Printing & Cleaning) | |
| Product Changeover | <5Min | |
| Air Required | 4.5~6Kg/cm2 | |
| Power Input | AC:220±10%,50/60HZ 1Φ 3KW | |
| Control Method | PC Control | |
| Machine Dimensions | 2500(L)X1200(W)X1500(H)mm | |
| Machine Weight | Approx:1800Kg | |
Company Information
Shenzhen ETON Automation Equipment Co. LTD. is a leading manufacturer of automatic high-speed pick and place machine focusing on “High efficiency Low consumption” in the word, meanwhile ETON is also the largest high-tech manufacturer in China with strong capability of design, R&D, manufacturing, sales and service, and rated as “Shenzhen high-tech enterprise” “China high-tech enterprise” “Shenzhen top brand” “2015 LED Technology innovation Award” “The 4th China LED First Innovation Award” “Industry Special Contribution Award” “Double soft enterprise” etc.
Company five level management policy: sincere business, focus on R&D, manufacturing intentions, considerate service, customer trust.